■  Base reinforcement

■  Subgrade reinforcement

■ Slope reinforcement

■ Embankment stabilization

Storage Information:

•Storage location should be dry, preferably covered and free of dust, dirt and moisture.

•If stored outdoors, do not remove the water proof covering until time of application.

Site Preparation:

•     Debris, stumps and other large plant growth etc. should be removed from the site and a clean leveled surface should be formed.

•     Care should be taken to avoid disturbing any surface crust overlying softer soil. In these cases, the geogrid should be placed directly on the unprepared subgrade.

•     The fill material selected should generally be the graded material.

•    It is best to have the graded filter analysis done by the Geotechnical Engineer.

Installation Details:

* Note: For safety reasons it is recommended that workers wear gloves and safety glasses while handling geogrid.

 •     Place geogrid in position and manually roll it out over the subgrade.

 •     Overlap the adjacent geogrid rolls

•      Adjacent rolls should simply be overlapped and do not need to be tied together.

•      Geogrid corners may be held down with shovelfuls of fill sandbags etc

•      Dumping, Spreading Fill & Compaction: